Manual Dispenser for Dual Cartridge adhesives

Our two component Mixpac, MK and Cox manual dispensers are hand operated applicators for adhesives packed in 25ml, 50ml, 200ml and 400ml dual cartridges and 380ml Coaxial cartridges. They are suited for all adhesive chemistry such as Epoxy, Polyurethane, Silicone and Methacrylate

Manual Dispenser for Dual Cartridge adhesives

Automotive

Wind Energy

Solar

General Engineering

MIXPAC™ DMA/DMB

MIXPAC™ DMA/DMB
Weight 184g

Specifications

Cartridge Capacity 50-75mL
Length 109mm
Cartridge Ratio 1:1, 2:1, 4:1, 10:1

MIXPAC™ DS

MIXPAC™ DS
Weight 215g

Mixpac DMA 51 and DS are manual dispensers for 50ml dual cartridges. It is important for users to note that DMA51 is used for 50ml R Flange cartridges while DS range is used for 50ml S flange cartridges. Manufactured using engineered plastics like PBT and Nylon these products offer high rigidity for use with low and medium viscous products. Specific part numbers are available for various mixing ratios.

MIXPAC™ DM2X 200

Weight 1.60kg
Length 324mm
Maximum Thrust 5.2kN
Cartridge Capacity 200 mL

Specifications

Cartridge Ratio 1:1, 2:1, 4:1, 10:1

MIXPAC™ DM2X 400

Weight 1.93kg
Length 366mm
Maximum Thrust 6.0kN
Cartridge Capacity 400 ml

Mixpac DM2X 200 and DM2X 400 are high powered manually operated 2nd generation dispensers to apply two component epoxy, acrylic, silicone or polyurethane adhesives from Mixpac C and F type cartridges. Stable piston rods and rigid tool frame provide support for superior mixing and dispensing performance with a thrust of 5.2kN. Mixpac DM2X are an all in one solution, conversion kits allow 1:1, 2:1, 4:1 and 10:1 cartridges to be used in the same Mixpac DM2X dispenser instead of using four different dispensers.

Cox™ VBM200 MR

Cox™ VBM200 MR
Weight 1.5 Kg
Length 212 mm
Cartridge Capacity 200 mL

Specifications

Cartridge Ratio 1:1, 2:1, 4:1, 10:1
Maximum Thrust 3.5kN
Mechanical
Advantage Ratio
18:1

Cox™ VBM400 MR

Cox™ VBM400 MR
Weight 1.7 kg
Length 200 mm
Cartridge Capacity 400 ml

VBM 200 and VBM 400 are our entry level manual dispensing applicators for 200ml and 400ml cartridges. Both the dispensers are designed to be used with different cartridge types, though fitment is suggested prior to purchase. The frame and handles are made of high quality cast aluminium and epoxy coated steel for day long comfortable use. Wear compensation device (WCD) gives you long and worry free efficient dispensing.

Cox™ CCM380

Cox™ CCM380

Specifications

Maximum Thrust 3.5kN
Mechanical Advantage Ratio 18:1
Weight 1.1kg
Length 181mm
Capacity 380mL

Not Available

NA

Cox CCM380 is a two component manual dispenser designed for use with 380ml coaxial cartridges. This dispenser is powered by an 18:1 mechanical advantage ratio that reduces risk of operator fatigue and increases productivity. This applicator has robust construction of steel frames that provides long and worry free performance.

Specifications

Maximum Thrust 2.5kN
Weight 0.24kg
Length 109 mm
Capacity 50/75ml

Not Available

NA

Cox™ MR 50 is 50ml dual cartridge manual glue dispenser for two component epoxy, polyurethane, acrylic and other adhesives.